Statistics Of Computer Generated Targets
Point 1: Accuracy: The instrument used (modified) is 100% accurate in identifying fractured / porous earth, showing a differential in compression (from soft zones to harder zones) along the traverse. A well driller will tell you, to receive water, he needs to intersect fracturing for water collects in fractures.
But people want to know how much water they will receive. No instrument is able to determine water in gallons per minute. From experience we can determine (which is a guesstimate) volumes of water when the profiling reveals certain configurations with around a 90% accuracy for high capacity water wells. That is within a range greater than 60 gpm, within around 20 to 60 gpm and within a few gpm to 20 gpm.
Point 2: Approximately 90% of homeowners who selected a computer generated detailed survey to identify aquifer geometrics, with sufficient acreage, have received a good water well saving thousands of dollars in drilling expense.
There is always a degree of minimum water 99 % of the time when wells are drilled to depth. Called seepage wells. The well will recharge in a week or so to be pumped, receiving minimum gallons of water. Do not Drill Blindly on water-
Point 3:: For high capacity water wells, there is seldom a need to drill past 600 feet. The heart of an aquifer generally resides between 200 to 500 feet in depth. See video 4 of 4 “Aquifer Geometrics”. And Video 300 gpm.
See the general depth in "Testimonials."
Point 4: If you have a low producing well, selected by water-
Due to outdated methods used, for improper drilling locations, most water wells are drilled outside of the more productive fracture zones.
EL Cajon see “Marg”.
Point 5: When a defined aquifer system is passing through your subsurface, that system will show up within computer profiles 100% of the time.
Point 6:: Only a handful of wells chosen by Water Locating . Com were drilled past the 600 feet in depth within a 28 year period.
Point 7:: Drought conditions have lowered the water table and some fractured targets goes down to depth where the water will seek it’s own level. Around 500 feet in depth you will accept the well drillers recommendations as to drilling any deeper due to continued fracturing or soft / porous earth, etc. and you want water or more water in gpm.
Dave Abbott, Hydrologists
Indicating that most water resides within 300 feet of the surface.
Starting On Page 4. Cut & Paste
https://www.grac.org/media/files/files/d3c31d85/Winter_2007.pdf
Scientific |
Sprinkler |
Videos |
Videos 1,2,3,4 |
Vista Ca 2014 |
Drillers Testify |
Ramona Videos |
Video 1 of 4 How It Works (Important) |
Video 2 of 4 Lineament Analysis |
Video 3 of 4 Water-Witching & EKS |
Video 4 of 4 Aquifer Geometrics |
Vista Video |
Testimonial |
San Diego |
Riverside |
Los Angeles |
Alpine |
Bonsall |
Descanco |
El Cajon |
Escondido |
Fallbrook |
Jamul |
Julian |
Lakeside |
Pauma Valley |
Poway |
Rainbow |
Ramona |
Santa Ysabel |
Valley Center |
Warner Springs |
Ramona Video |
Anza |
Aguanga |
Benton Area |
Hemet |
La Cresta |
Murrieta |
Perris |
Temecula |
Acton |
Agua Dulca |
Santa Clarita |
Aquifers |
San Diego |
Riverside |
San Bernardino |
Los Angeles |
Pivot Farms |
About Us |
Drillers Testimonial |
Do's & Don'ts |
Dud Wells |